ISO 9001:2008 Certificate No: 49466

Conductive Smooth Bore Hose

SS Braided PTFE Hose
Conductive Smooth Bore Hose

Some applications require a conductive inner liner to dissipate electrical charges. High resistivity fluids or gases at high velocity cause positive electrical charges to build on the inside of the PTFE liner. If not dissipated to the end of the hose, the charge will build until it arcs through the tube wall to the braid, causing catastrophic hose failure. To alleviate this, the PP-1170 PTFE tube is manufactured with a thin conductive liner on the I.D.

Suggested uses:
• Steam Transfer • Bio diesel • High flow Fuel • Oil lines

Return to Stainless Steel Braided PTFE Hose Index

Reference image at top

Part Number: PH311-03
-03 Conductive PTFE Tube, .040 wall, Op. - 3,000 PSI, Burst - 12,000 PSI, price per foot. Stainl...
Cost: $2.90/ft

Reference image at top

Part Number: PH311-04
-04 Conductive PTFE Tube, .030 wall, Op. - 3,000 PSI, Burst - 12,000 PSI, price per foot. Stain...
Cost: $3.22/ft

Reference image at top

Part Number: PH311-06
-06 SS braided PTFE Conductive hose, .030 wall, Operating - 2,500 PSI, Burst - 10,000 PSI, price...
Cost: $4.22

Reference image at top

Part Number: PH311-08
-08 SS braided PTFE Conductive hose, .030 wall, Operating - 2,000 PSI, Burst - 8,000 PSI, price ...
Cost: $4.52

Reference image at top

Part Number: PH311-10
-10 SS braided PTFE Conductive hose, .030 wall, Operating - 1,500 PSI, Burst - 6,000 PSI, price ...
Cost: $6.26

Reference image at top

Part Number: PH311-12
-12 SS braided PTFE Conductive hose, .030 wall, Operating - 1,200 PSI, Burst - 4,800 PSI, price ...
Cost: $6.68

Reference image at top

Part Number: PH311-16
-16 SS braided PTFE Conductive hose, .030 wall, Operating - 1,000 PSI, Burst - 4,000 PSI, price ...
Cost: $10.12

SS Braided PTFE HoseConductive Smooth Bore Hose

SS Braided PTFE Hose
Conductive Smooth Bore Hose